To Open: Cut off the tip of the cartridge above the screw thread. Screw on nozzle and cut at 45˚ angle to desired bread size.
To Use: All surfaces should be clean and free of dirt, grease, oil, and old sealant. For gaps larger than 12mm use a backer rod to fill the gap. Best if applied above 5˚C.
- Insert into cartridge gun.
- Apply sealant, pushing bead ahead of nozzle.
- Smooth bead immediately after application, before a skin forms.
- For clean-up, wipe wet sealant off project immediately with a dry cloth. Isopropyl alcohol may be used according to solvent manufacturer’s instructions.